2021 XL Specialized XL Power Tail XL 80

Information

2021 XL Specialized XL Power Tail XL 80

With a load angle of 10 degrees, the hydraulic tail is equipped to easily handle hard- to-load equipment such as man lifts, rollers, forklifts and paving equipment. The tail features a lifting capacity of 25,000 pounds for loads centered on the main platform.

Features may include:
  • Planetary drive 18,000 lb hydraulic winch with 75’ of 1/2” cable and an air kick out
  • A 9’ pop-up ramp from deck to neck allows for easy loading onto the neck.
  • Work light at rear of the gooseneck for loading and unloading in the dark.
  • A foot hole and grab handle on each side of the gooseneck assist in climbing onto the deck.
  • A 2 function wireless remote comes standard, other remote options are available
  • Tail hinge points stay clean thanks to lug style hinges. These hinges prevent debris from accumulating.
  • The tail is comprised of two sections – an 8-foot 8-inch platform ramp and a 60-inch flip tail.

Photos

Highlights

  • Richland, Mississippi
  • 2021
  • XL Specialized
  • XL Power Tail XL 80
  • 10" & 8" Jr. I-Beam Cross Members On Alternating 12" Centers | 18" Fabricated I-Beam Side Members
  • Available
  • 5th Wheel: 49" | Loaded Main Deck: 36"

Specifications

  • 2021
  • XL Specialized
  • XL Power Tail
  • XL 80
  • Flatbed
  • Long Full-Width Gooseneck: 9' | Slope: 90º | Swing Clearance: 86" | 9' Long Pop-Up Ramp, Deck To Neck | 13' 8" Hydraulic Tail: 8' 8" Platform 60" Fold Under Flip Tail | Axle Spacing: 49" | Brakes: 12 1/4" X 7 1/2"
  • 48' Or 53' | Main deck: 48' Oal: 30' 4" Long - 53' Oal: 35' 4" Long
  • 102"
  • 16"
  • 5th Wheel: 49" | Loaded Main Deck: 36"
  • 80,000 LB
  • 25,000 lb Nominal
  • 50,000 LB in 10'
  • 10" & 8" Jr. I-Beam Cross Members On Alternating 12" Centers | 18" Fabricated I-Beam Side Members
  • 2
  • 7 Pole Electrical Socket
  • D.O.T. Approved 12v Sealed
  • Rubber mounted Led lights | 3 Tail Light Package | (1) Mid-Turn Signal Per side | (2) Clearance Lights Per  Side
  • 6.75 X 17.5 steel Rims
  • 245/ 70r/ 17.5 Tires
  • 25,000 lb Air Ride
  • Spring Brakes On 2 Axles
  • 4S2M
  • Black | IH Red | Cat Yellow
  • Steel Tread Plate Decking on Gooseneck | (2) D-Rings Per Side on Gooseneck | 2 Speed Landing Gear With Handle On Driver Side on Gooseneck | Wet Line Hydraulics To Run Off Truck | Hydraulic Levers On Driver Side on Gooseneck | Planetary Drive 18,000 Lb Hydraulic Winch With 75' Of 1/2" Cable & Air Kick Out | 2 Function Wireless Remote For Winch | 2 Toolboxes With Lids | Integrated Foot Step And Grab Handle, On Both Sides | T-I Flange, 80k Web Main Deck | 1/4" Tread Plate Covered Wheels | (5) D-Rings Per Side | Stake Pockets And Chain Slots On Alternating 24" Centers, Sides | Chain Slots Down Center Of Deck On 48" Centers | Automatic Flip Tail Lock | Hub Pilot, Outboard Drums on Axles | Auto Slack Adjusters on Axles | Air Dump On Both Axles | Air & Electric Done After Paint
  • Main deck: Raised Apitong: 1 3/8"
  • Paint: 1 Year