2021 XL Specialized XL Low-Profile HDG: 18" Deck Height XL 110 HDG
- Year 2021
- Make XL Specialized
- Model XL Low-Profile HDG: 18" Deck Height
2021 XL Specialized XL Low-Profile HDG: 18" Deck Height XL 110 HDG
With 18-inch loaded deck height and drop bolsters in the rear at 37-inches tall, this lowboy is ready to haul your equipment under low bridges. The seven position manual ride height adjustment in the rear and five position variable ride height in the gooseneck enable even more deck adjustment based on the load. Haul with confidence thanks to a capacity rating of 110,000 pounds in 12 feet and i-beam cross members on 12-inch centers, and a five year structural warranty.
Features may include:- Loads and hauls tall equipment with an 18” deck height
- Deep well for long booms, no need to detach lower boom section
- A low rear transition angle lowered bolsters allows for easy loading of equipment over rear deck.
- Heavy duty outriggers allow loading of heavy wide track units
- Plenty of tie downs for hard to secure loads
- D.O.T. approved 12V sealed Grote harness with 7 year warranty
- Always striving to surpass market standards, all new XL products feature a 5 year structural warranty
- 26’ of well for transporting large equipment
- XL’s one piece construction results in stronger products. Trailer I-beams are made from one piece web and flange and then welded on all sides
- 1-3/8" raised Apitong decking (center open) is more durable than Oak and stands up to years of wear
- 5 position variable ride height
- Bucket well provides needed room in the rear bridge
- Frame reinforcement for a single axle Booster
Dimensions
Dimensions
13' Low-Profile Neck With Relief Cut-Out | Swing Clearance: 110" & 84" | Front Flip Ramps: 31" | Axle Spacing: 54 1/2"
Length
Main Deck: 26' | Rear Bridge: 14'
Height
5th Wheel: 51" | Loaded Main Deck: 18" | Loaded Rear Bridge Deck: 41"
Overall Length
53'
Overall Width
102"
Kingpin Setting
16" & 42"
Ground Clearance
6"
Capacities
Cargo Capacity
110,000 Lb In 12'
Axle Capacity, Rear
25,000 lb Nominal
Chassis
Chassis
8" & 4" Stubbed Jr. I-Beam Cross Members On 12" Alt. Ctrs. | (4) 12" Fully Cambered I-Beams
Axle Count
3
Electric
Electrical
7 Pole Electrical Socket
Harness
D.O.T. Approved 12v Sealed
Lights and Safety
Lighting
Rubber mounted Led lights | (1) Mid-Turn Signal Per side | (2) Clearance Lights Per Side | 2 Tail Light Package With Aluminum Cover
Wheels & Tires
Wheels
8.25 X 22.5 Steel Rims
Tires, Rear Specification
255/ 70R/ 22.5 H Rated Tires
Suspension
Suspension
25,000 lb Air Ride | Raise And Lower Valve | Manual Ride Height Control
Brakes
Brake System Type
16 1/2" X 7" | Spring Brakes On 1 Axle
Color
Colors
Black | IH Red | Cat Yellow
Features
Features
5 Position Variable Ride Height | Hydraulics Run Off Of Wet Kit | Air Operated Lock W/ Manual Safety Latch | Brackets For Power Unit | Work Light | T-I Flange, 80k Web | (7) Bent D-Rings Per Side | Toolbox In Front | 4) Flat-D-Rings In Toolbox | (13) Chain Drops Per Side | Swing Out Outriggers On 24" Centers | Heavy Duty Flatback Outriggers At Front | Bucket Well At Rear, Plate On Bottom | (4) Flat D-Rings In Bucket Well | (2) Flag Holders | Front Ramp Upper Flange Reinforcement | Rear Transition With 32° Slope | Open Wheels With Bolsters Dropped 4" | Open Boom trough | (2) Flat D-Rings On Main Beams At Rear | (2) Chain Drops On Each Bolster | (2) Stake Pockets In Tail Channel For Wide Load Sign | Frame Reinforcement For Booster | Angled Control Panel | (2) Flag Holders | Air Lift On 3Rd Axle | Hub Pilot, Outboard Drums | Limit Chains On All Axles | Auto Slack Adjusters | Air & Electric Done After Paint
Construction Material
1 3/8" Raised Apitong Decking - Center Open
Warranty
Warranty
Paint: 1 Year