Inner: Two (2) 12” deep manufactured beams with 1/4” web (minimum 50k grade web material) | Outer: Two (2) 12” deep manufactured beams with 1/4” web (minimum 50k grade web material) | Flange Inner: 3/4” × 7” minimum 130k grade material | Flange Outer: 1/2” × 6” minimum 130k grade material | Rating: 60,000 lbs in 16 feet
Lower Deck Nose: Tapered nose on lower deck with gripper lugs | Neck: Full width top deck with outer perimeter beams and 2 D-rings on each side | Side Rail: Outer perimeter beam with 4 D-rings on each side of the main deck
Lower Deck Nose: Tapered nose on lower deck with gripper lugs | Neck: Full width top deck with outer perimeter beams and 2 D-rings on each side | Side Rail: Outer perimeter beam with 4 D-rings on each side of the main deck
2 axles – 25,000 lb nominal with 77.5 tracking
Inner: Two (2) 12” deep manufactured beams with 1/4” web (minimum 50k grade web material) | Outer: Two (2) 12” deep manufactured beams with 1/4” web (minimum 50k grade web material) | Flange Inner: 3/4” × 7” minimum 130k grade material | Flange Outer: 1/2” × 6” minimum 130k grade material | Rating: 60,000 lbs in 16 feet
Kit: Standard Grote LED | Clearance Lights: 3 Clearance Lights Per Side | Rear: 4-3-4 Standard LED Lights
HT250 Air-ride Suspension
& Drums: Cast hub with outboard cast drums
Outer: 22.5” × 8.25” Steel – Prepainted White | Inner: 22.5” × 8.25” Steel – Prepainted White
General HT 255/70R22.5
Spring brakes with auto slack adjusters
Wabco 4S/2M
Flag Holders | Certificate Holder | FHWA Inspection | Bearing Lubricant: Oil in hubs | Axle Spacing: 54 inches – set to the rear | Paint: Black - 2 part epoxy primer and urethane top coat applied after shot blasting | Conspicuity Tape: Per NHTSA spec | Mudflaps: Single Pair At Rear | Sliding: No Sliding Axles | Axle Spindle: Tapered Spindle
Flooring: 1 3/8 Inch Apitong Wood Floor | Front & Rear Plates:
