2021 Doonan Trailers Chaparral II™ Flatbeds 482BBNLTTMKB

Information

2021 Doonan Trailers Chaparral II™ Flatbeds 482BBNLTTMKB

The Chaparral II™ flatbed uses a bolt together construction to allow for easy maintenance of floor boards, side rails, cross-members, front plates, and rear plates.

Features may include:
  • Omit Front Stake Pockets
  • Omit Rear Stake Pockets & Rubrail
  • Auto Dump When Set Park Brakes
  • Winch Track – Both Sides
  • Rubber Dock Bumpers

Photos

Highlights

  • Richland, Mississippi
  • 2021
  • Doonan Trailers
  • Chaparral II™ Flatbeds 482BBNLTTMKB
  • Two (2) 25” deep manufactured beams | Rating: 50,000 lbs in 4 feet
  • Top Flange Thickness: 3/8” × 5” minimum 130k grade material | Bottom Flange Thickness: 0.84” × 6” extruded aluminum bottom rail | Web Thickness: 0.300” web aluminum | Side Rail: 7.4” alum side rail with stake pockets on 24” centers, and dbl pipe spools, and integrated J hook track and integrated winch track
  • Available
  • 102”
  • Rear Deck: 54” | Fifth Wheel: 49” | Cross Sill: 5” alum. crossmembers on 15” centers

Specifications

  • 2021
  • Doonan Trailers
  • Chaparral II™ Flatbeds
  • 482BBNLTTMKB
  • Flatbed
  • 102”
  • 48’ 0”
  • Rear Deck: 48’ 0”
  • Rear Deck: 54” | Fifth Wheel: 49” | Cross Sill: 5” alum. crossmembers on 15” centers
  • 30”
  • 7,951 lbs.
  • Top Flange Thickness: 3/8” × 5” minimum 130k grade material | Bottom Flange Thickness: 0.84” × 6” extruded aluminum bottom rail | Web Thickness: 0.300” web aluminum | Side Rail: 7.4” alum side rail with stake pockets on 24” centers, and dbl pipe spools, and integrated J hook track and integrated winch track
  • 2 axles – 25,000 lb nominal with 77.5 tracking
  • Two (2) 25” deep manufactured beams | Rating: 50,000 lbs in 4 feet
  • Kit: Standard Grote LED | Clearance Lights: 5 Clearance Lights Per Side | Rear: 3-3-3 Standard LED Rear Lights
  • INTRAAX
  • & Drums: Lightweight steel hub and fused drums
  • Outer: 22.5” × 8.25” Aluminum – Milled | Inner: 22.5” × 8.25” Aluminum – Milled
  • General HT 295/75R22.5
  • Spring brakes with auto slack adjusters
  • Wabco 4S/2M
  • Axle Spacing: 122” – set to the rear | Paint: Silver – 2 part epoxy primer and urethane top coat applied after shot blasting | Conspicuity Tape: Per NHTSA spec | Bearing Lubricant: Oil in hubs | Mudflaps: One Pair Per Axle | Sliding: No Sliding Axles | Axle Spindle: Tapered Spindle
  • Flooring: Aluminum Floor W/ 3 Apitong Nailers