2021 Doonan Trailers Platinum™ (Combo) 482NBBICQFCB

Information

2021 Doonan Trailers Platinum™ (Combo) 482NBBICQFCB

The Platinum™ Fixed Neck Double Drop is an steel main beam based lowbed trailer with a non-removable neck. The Diamond™ has aluminum side rails and steel cross-members, where the Platinum™ has both aluminum side rails and aluminum cross members.

Photos

Highlights

  • Richland, Mississippi
  • 2021
  • Doonan Trailers
  • Platinum™ (Combo) 482NBBICQFCB
  • Inner: Two (2) 12” deep manufactured beams with 1/4” web (minumum 50k grade web material) | Flange Inner: 5/8” × 7” minimum 130k grade material | Rating: 60,000 lbs in 16 feet
  • Neck: Full width top deck | Side Rail: 7.4” alum side rail with stake pockets on 24” centers, and dbl pipe spools, and integrated J hook track and integrated winch track
  • Available
  • 102”
  • Rear Deck: 41" | Main Deck: 18" | Fifth Wheel: 49" | Cross Sill: 5” alum. crossmembers on 16” centers

Specifications

  • 2021
  • Doonan Trailers
  • Platinum™ (Combo)
  • 482NBBICQFCB
  • Lowboy
  • 102”
  • 48’ 0”
  • Top Deck: 10’ 0” | Main Deck: 29’ 0” | Rear Deck: 9’ 0”
  • Rear Deck: 41" | Main Deck: 18" | Fifth Wheel: 49" | Cross Sill: 5” alum. crossmembers on 16” centers
  • 16"
  • 11,695 lbs.
  • Neck: Full width top deck | Side Rail: 7.4” alum side rail with stake pockets on 24” centers, and dbl pipe spools, and integrated J hook track and integrated winch track
  • 2 axles – 25,000 lb nominal with 77.5 tracking
  • Inner: Two (2) 12” deep manufactured beams with 1/4” web (minumum 50k grade web material) | Flange Inner: 5/8” × 7” minimum 130k grade material | Rating: 60,000 lbs in 16 feet
  • Kit: Standard Grote LED | Clearance Lights: 5 Clearance Lights Per Side | Rear: 3-3-3 Standard LED Lights
  • HT250 Air-ride Suspension
  • & Drums: Cast hub with outboard cast drums
  • Outer: 22.5” × 8.25” Steel – Prepainted White | Inner: 22.5” × 8.25” Steel – Prepainted White
  • General HT 255/70R22.5
  • Spring brakes with auto slack adjusters
  • Wabco 4S/2M
  • Flag Holders | Certificate Holder | FHWA Inspection | Bearing Lubricant: Oil in hubs | Axle Spacing: 54 inches – set to the rear | Paint: Black – 2 part epoxy primer and urethane top coat applied after shot blasting | Conspicuity Tape: Per NHTSA spec | Mudflaps: Single Pair At Rear | Sliding: No Sliding Axles | Axle Spindle: Tapered Spindle
  • Flooring: Aluminum Floor W/ 3 Apitong Nailers | Front & Rear Plates: Aluminum