2021 Doonan Trailers Diamond™ (Combo) 482NBBICQFCB
- Year 2021
- Make Doonan Trailers
- Model Diamond™ (Combo)
2021 Doonan Trailers Diamond™ (Combo) 482NBBICQFCB
The Diamond™ Fixed Neck Double Drop is an steel main beam based lowbed trailer with a non-removable neck. The Diamond™ has aluminum side rails and steel cross-members, where the Platinum™ has both aluminum side rails and aluminum cross members.
Dimensions
							Width
							102”
						
						
							Overall Length
							48’ 0”
						
						
							Length
							Top Deck: 10’ 0” | Main Deck: 29’ 0” | Rear Deck: 9’ 0”	
						
						
							Height
							Rear Deck: 40" | Main Deck: 18" | Fifth Wheel: 49" | Cross Sill: 4” Steel crossmembers on 12” centers
						
						
							Kingpin Setting
							16"
						
						Weights
							Weight
							11,695 lbs.
						
						Chassis
							Chassis
							Neck: Full width top deck | Side Rail: Aluminum: 6” Extrusion w/ Stake Pockets on 24” Ctr, Double Pipe Spls
						
						
							Axle Count
							2 axles – 25,000 lb nominal with 77.5 tracking
						
						
							Beam
							Inner: Two (2) 12” deep manufactured beams with 1/4” web (minumum 50k grade web material) | Flange Inner: 5/8” × 7” minimum 130k grade material | Rating: 60,000 lbs in 16 feet
						
						Lights and Safety
							Lighting
							Kit: Standard Grote LED | Clearance Lights: 3 Clearance Lights Per Side | Rear: 4-3-4 Standard LED Lights
						
						Suspension
							Suspension
							HT250 Air-ride Suspension
						
						
							Hub Type
							& Drums: Cast hub with outboard cast drums
						
						Wheels & Tires
							Wheels
							Outer: 22.5” × 8.25” Steel – Prepainted White | Inner: 22.5” × 8.25” Steel – Prepainted White
						
						
							Tires, Rear Specification
							General HT 255/70R22.5
						
						Brakes
							Brake System Type
							Spring brakes with auto slack adjusters
						
						
							ABS Option
							Wabco 4S/2M	
						
						Features
							Construction Material
							Flooring: 1 3/8 Inch Apitong Wood Floor | Front & Rear Plates: Steel
						
						
							Features
							Flag Holders | Certificate Holder | FHWA Inspection | Bearing Lubricant: Oil in hubs | Axle Spacing: 54 inches – set to the rear | Paint: Black – 2 part epoxy primer and urethane top coat applied after shot blasting | Conspicuity Tape: Per NHTSA spec | Mudflaps: Single Pair At Rear | Sliding: No Sliding Axles | Axle Spindle: Tapered Spindle
						
					
 
         
			