2021 Doonan Trailers Black Gold™ (Steel) 482SBEICNHCA

Information

2021 Doonan Trailers Black Gold™ (Steel) 482SBEICNHCA

The Black Gold™ Fixed Neck Double Drop is an all steel based lowbed trailer with a non-removable neck. Like all other Doonan products various flange and web thicknesses control the trailer’s capacity. See the typical trailer specifications by selecting the hyperlink above.

Photos

Highlights

  • Richland, Mississippi
  • 2021
  • Doonan Trailers
  • Black Gold™ (Steel) 482SBEICNHCA
  • Flange Outer: 1” × 7” minimum 130k grade material | Flange Inner: 5/8” × 7” minimum 130k grade material | Inner: Two (2) 16” deep manufactured beams with 3/8” web (minumum 50k grade web material) | Outer: Two (2) 16” deep manufactured beams with 3/8” web (minumum 50k grade web material) | Rating: 60,000 lbs in 16 feet
  • Neck: Full width top deck with outer perimeter beams and 2 D-rings on each side | Side Rail: Outer perimeter beam with 4 D-rings on each side of the main deck
  • Available
  • 102”
  • Rear Deck: 40" | Main Deck: 22" | Fifth Wheel: 49" | Cross Sill: 10” & 4” alternating crossmembers on 12” centers

Specifications

  • 2021
  • Doonan Trailers
  • Black Gold™ (Steel)
  • 482SBEICNHCA
  • Lowboy
  • Swing Clearance: 82"
  • 102”
  • 48’ 0”
  • Top Deck: 10’ 0” | Main Deck: 29’ 0” | Rear Deck: 9’ 0”
  • Rear Deck: 40" | Main Deck: 22" | Fifth Wheel: 49" | Cross Sill: 10” & 4” alternating crossmembers on 12” centers
  • 16"
  • 14,006 lbs.
  • Neck: Full width top deck with outer perimeter beams and 2 D-rings on each side | Side Rail: Outer perimeter beam with 4 D-rings on each side of the main deck
  • 2 axles – 25,000 lb nominal with 77.5 tracking
  • Flange Outer: 1” × 7” minimum 130k grade material | Flange Inner: 5/8” × 7” minimum 130k grade material | Inner: Two (2) 16” deep manufactured beams with 3/8” web (minumum 50k grade web material) | Outer: Two (2) 16” deep manufactured beams with 3/8” web (minumum 50k grade web material) | Rating: 60,000 lbs in 16 feet
  • Kit: Standard Grote LED | Clearance Lights: 3 Clearance Lights Per Side | Rear: 4-3-4 Standard LED Lights
  • HT250 Air-ride Suspension
  • & Drums: Cast hub with outboard cast drums
  • Outer: 22.5” × 8.25” Steel – Prepainted White | Inner: 22.5” × 8.25” Steel – Prepainted White
  • General HT 255/70R22.5
  • Spring brakes with auto slack adjusters
  • Wabco 4S/2M
  • Flag Holders | Certificate Holder | FHWA Inspection | Bearing Lubricant: Oil in hubs | Axle Spacing: 54 inches – set to the rear | Paint: Black - 2 part epoxy primer and urethane top coat applied after shot blasting | Conspicuity Tape: Per NHTSA spec | Mudflaps: Single Pair At Rear | Sliding: No Sliding Axles | Axle Spindle: Tapered Spindle
  • Flooring: 1 1/2 Inch Apitong Wood Floor