2024 Clement Rollstar 2-Box Rolloff Trailer DDROT-4820-W-ET2SA

2024 Clement Rollstar 2-Box Rolloff Trailer DDROT-4820-W-ET2SA

Swipe to View More

  • Year 2024
  • Make Clement
  • Model Rollstar 2-Box Rolloff Trailer
2024 Clement Rollstar 2-Box Rolloff Trailer DDROT-4820-W-ET2SA

2024 Clement Rollstar 2-Box Rolloff Trailer DDROT-4820-W-ET2SA

2024 Clement Rollstar 2-Box Rolloff Trailer DDROT-4820-W-ET2SA

Rollstar 2-Box Rolloff Trailer

Easier, Simpler and Safer.

Operators of roll-offs are turning to the completely redesigned Clement RollStar 2-Box as the answer to the distance between plant sites and the hundreds-of-miles-away destinations.

Dimensions

Roller Diameter (each side) (6) 5-inch OD on Tilt, (6) 4-inch OD on Main - all with Brass Bushings and grease Zerks | Top to Ground: 55-inches
Dimensions Dump Angle: 45° | Axle Spacing: 121" | Rails Outside: 34.25 inches | Rails Inside: 26.25 inches | Cable: 3/4-inch | Reeving Cylinders: 6 x 79-inch

Weights

Weight Total: 13,078 lbs

Capacities

Axle Capacity, Rear 102-inch, 25,000 lb, 5-inch round, common inner/outer bearings
Cargo Capacity Winch Line Pull: 29,762 lbs (ability to load approx. 42,000 lbs container) | Reeving Cylinders Line Pull: 28,274 lbs (ability to load approx. 42,000 lbs container)
Hydraulic Capacity Hydraulic Reservoir: Winch Model: 50-gallon / Reeving Model: 75-gallon

Chassis

Mainframe 30-inch fabricated I-Beam | Lift: 9-inch Tube
Chassis Container Hold Downs: Front and Rear

Engine

Cylinder Liners Reeving: 2 - 6 x 79-inch | Hoist: Twin - 6 x 79-inch Outboard cylinder

Lights and Safety

Lighting 12 Volt Sealed Beam
Safety Features Back-up Alarm: Yes

Operational

Operating Speed Two-Speed Stiff Legs

Suspension

Suspension Style: Spread Air

Hydraulics

Hydraulic Type 3-bank manual control valve mounted approximately center of trailer on the driver's side

Wheels & Tires

Wheels 8.25 x 24.5, Hub-Piloted
Tires, Rear Specification 11.00 x 24.5 Radial
Hub Type 10 Hole pilot hub

Brakes

Brake System Type Air 16-1/2x7-inch cast drum

Features

Features Hoist: Single 6" | Wiring: Sealed Harness Modular Plug-In | Rear Impact Guard: Yes | Front Box Transfer System: Hydraulic motor and conveyor chain moves box both forward and rearward from its position on tilt frame to/from main frame

Color

Colors Paint Finish: Urethane Enamel over primed surface

Product Photography