2024 Clement Rollstar 2-Box Rolloff Trailer DBROT-4820-R-ET3A
- Year 2024
- Make Clement
- Model Rollstar 2-Box Rolloff Trailer
2024 Clement Rollstar 2-Box Rolloff Trailer DBROT-4820-R-ET3A
2024 Clement Rollstar 2-Box Rolloff Trailer DBROT-4820-R-ET3A
Rollstar 2-Box Rolloff TrailerEasier, Simpler and Safer.
Operators of roll-offs are turning to the completely redesigned Clement RollStar 2-Box as the answer to the distance between plant sites and the hundreds-of-miles-away destinations.
Dimensions
Roller Diameter
(each side) (6) 5-inch OD on Tilt, (6) 4-inch OD on Main - all with Brass Bushings and grease Zerks | Top to Ground: 55-inches
Dimensions
Dump Angle: 45° | Axle Spacing: 49" | Rails Outside: 34.25 inches | Rails Inside: 26.25 inches | Cable: 3/4-inch | Reeving Cylinders: 6 x 79-inch
Capacities
Axle Capacity, Rear
102-inch, 25,000 lb, 5-inch round, common inner/outer bearings
Cargo Capacity
Winch Line Pull: 29,762 lbs (ability to load approx. 42,000 lbs container) | Reeving Cylinders Line Pull: 28,274 lbs (ability to load approx. 42,000 lbs container)
Hydraulic Capacity
Hydraulic Reservoir: Winch Model: 50-gallon / Reeving Model: 75-gallon
Chassis
Mainframe
30-inch fabricated I-Beam | Lift: 9-inch Tube
Chassis
Container Hold Downs: Front and Rear
Engine
Cylinder Liners
Reeving: 2 - 6 x 79-inch | Hoist: Twin - 6 x 79-inch Outboard cylinder
Lights and Safety
Lighting
12 Volt Sealed Beam
Safety Features
Back-up Alarm: Yes
Operational
Operating Speed
Two-Speed Stiff Legs
Suspension
Suspension
Style: Tandem 6 Spring
Hydraulics
Hydraulic Type
3-bank manual control valve mounted approximately center of trailer on the driver's side
Wheels & Tires
Wheels
8.25 x 24.5, Hub-Piloted
Tires, Rear Specification
11.00 x 24.5 Radial
Hub Type
10 Hole pilot hub
Brakes
Brake System Type
Air 16-1/2x7-inch cast drum
Features
Features
Hoist: Twin 6" | Wiring: Sealed Harness Modular Plug-In | Rear Impact Guard: Yes | Front Box Transfer System: Hydraulic motor and conveyor chain moves box both forward and rearward from its position on tilt frame to/from main frame
Color
Colors
Paint Finish: Urethane Enamel over primed surface