2024 Clement Rollstar 2-Box Rolloff Trailer DBROT-4820-R-ET2SA
- Year 2024
- Make Clement
- Model Rollstar 2-Box Rolloff Trailer
2024 Clement Rollstar 2-Box Rolloff Trailer DBROT-4820-R-ET2SA
Rollstar 2-Box Rolloff TrailerEasier, Simpler and Safer.
Operators of roll-offs are turning to the completely redesigned Clement RollStar 2-Box as the answer to the distance between plant sites and the hundreds-of-miles-away destinations.
Dimensions
							Roller Diameter
							(each side) (6) 5-inch OD on Tilt, (6) 4-inch OD on Main - all  with Brass Bushings and grease Zerks | Top to Ground: 55-inches
						
						
							Dimensions
							Dump Angle: 45° | Axle Spacing: 121" | Rails Outside: 34.25 inches | Rails Inside: 26.25 inches | Cable: 3/4-inch | Reeving Cylinders: 6 x 79-inch
						
						Weights
							Weight
							Total: 16,583 lbs
						
						Capacities
							Axle Capacity, Rear
							102-inch, 25,000 lb, 5-inch round, common inner/outer bearings
						
						
							Cargo Capacity
							Winch Line Pull: 29,762 lbs (ability to load approx. 42,000 lbs container) | Reeving Cylinders Line Pull: 28,274 lbs (ability to load approx. 42,000 lbs container)
						
						
							Hydraulic Capacity
							Hydraulic Reservoir: Winch Model: 50-gallon / Reeving Model: 75-gallon
						
						Chassis
							Mainframe
							30-inch fabricated I-Beam | Lift: 9-inch Tube
						
						
							Chassis
							Container Hold Downs: Front and Rear
						
						Engine
							Cylinder Liners
							Reeving: 2 - 6 x 79-inch | Hoist: Twin - 6 x 79-inch Outboard cylinder
						
						Lights and Safety
							Lighting
							12 Volt Sealed Beam
						
						
							Safety Features
							Back-up Alarm: Yes
						
						Operational
							Operating Speed
							Two-Speed Stiff Legs
						
						Suspension
							Suspension
							Style: Spread Air
						
						Hydraulics
							Hydraulic Type
							3-bank manual control valve mounted approximately center of trailer on the driver's side
						
						Wheels & Tires
							Wheels
							8.25 x 24.5, Hub-Piloted
						
						
							Tires, Rear Specification
							11.00 x 24.5 Radial
						
						
							Hub Type
							10 Hole pilot hub
						
						Brakes
							Brake System Type
							Air 16-1/2x7-inch cast drum
						
						Features
							Features
							Hoist: Twin 6" | Wiring: Sealed Harness Modular Plug-In | Rear Impact Guard: Yes | Front Box Transfer System: Hydraulic motor and conveyor chain moves box both forward and rearward from its position on tilt frame to/from main frame
						
						Color
							Colors
							Paint Finish: Urethane Enamel over primed surface
						
					
 
         
			