2024 Clement Rollstar 2-Box Rolloff Trailer DBROT-4820-FT-BR

Information

2024 Clement Rollstar 2-Box Rolloff Trailer DBROT-4820-FT-BR

Rollstar 2-Box Rolloff Trailer

Easier, Simpler and Safer.

Operators of roll-offs are turning to the completely redesigned Clement RollStar 2-Box as the answer to the distance between plant sites and the hundreds-of-miles-away destinations.

Photos

Highlights

  • Richland, Mississippi
  • 2024
  • Clement
  • Rollstar 2-Box Rolloff Trailer DBROT-4820-FT-BR
  • Container Hold Downs: Front and Rear
  • Available

Specifications

  • 2024
  • Clement
  • Rollstar 2-Box Rolloff Trailer
  • DBROT-4820-FT-BR
  • Other
  • Dump Angle: 45° | Rails Outside: 34.25 inches | Rails Inside: 26.25 inches | Cable: 3/4-inch | Reeving Cylinders: 6 x 79-inch
  • (each side) (6) 5-inch OD on Tilt, (6) 4-inch OD on Main - all with Brass Bushings and grease Zerks | Top to Ground: 55-inches
  • Total: 15,269 lbs
  • 102-inch, 25,000 lb, 5-inch round, common inner/outer bearings
  • Winch Line Pull: 29,762 lbs (ability to load approx. 42,000 lbs container) | Reeving Cylinders Line Pull: 28,274 lbs (ability to load approx. 42,000 lbs container)
  • Hydraulic Reservoir: Winch Model: 50-gallon / Reeving Model: 75-gallon
  • Container Hold Downs: Front and Rear
  • 30-inch fabricated I-Beam | Lift: 9-inch Tube
  • Reeving: 2 - 6 x 79-inch | Hoist: Twin - 6 x 79-inch Outboard cylinder
  • 12 Volt Sealed Beam
  • Back-up Alarm: Yes
  • Two-Speed Stiff Legs
  • Style: Bridger S.P
  • 3-bank manual control valve mounted approximately center of trailer on the driver's side
  • 8.25 x 24.5, Hub-Piloted
  • 11.00 x 24.5 Radial
  • 10 Hole pilot hub
  • Air 16-1/2x7-inch cast drum
  • Hoist: Twin 6" | Wiring: Sealed Harness Modular Plug-In | Rear Impact Guard: Yes | Front Box Transfer System: Hydraulic motor and conveyor chain moves box both forward and rearward from its position on tilt frame to/from main frame
  • Paint Finish: Urethane Enamel over primed surface